How do I remove the Driver-side Visor (with Homelink)
You have to remove the left front pillar molding (w/ speaker)
Then remove the small holder that holds the visor on the right
Then pop the center overhead console down from the ceiling
Then unscrew the three screws holding the visor on.
Then pull down on the roof liner carefully in that front corner until you can reach inside and pry the harness connector from the roof liner (it's glued). Becareful, the roofliner is fiberglass and will give you fiberglass splinters!
Once you pry the connector up, you then need to manipulate the connector loose (you can only fit one arm in there)
Then you just plug the new visor up to the old connector, and reconnect everything.
Thanks M sheri
This site is not affiliated with General Motors or Cadillac. All trademarks are property of their respective owners.
All pages copyright www.cadillacfaq.com.
Donate to keep this site live and ad free Here
List Style FAQ---
For questions or comments email firstname.lastname@example.org